🇺🇸We ship to the USA!USPS International Tracked from $12Duties & taxes shown at checkoutPrices shown in £ GBP & $ USD
← News & Guides

Fitment

Popular requests, and how to brief a custom design properly

Velox Stitched Workshop ·

Popular requests, and how to brief a custom design properly

The briefs that go smoothly have the same six facts in them. Here is what to send, what we will ask next, and the mistakes that turn a simple build into a fortnight of emails.

The six facts that make a brief workable

Most of the back-and-forth in a custom order comes from one missing detail that could have been in the first message. These six are the ones that matter.

  • Make, model, generation and year. "Golf GTI" covers eight generations. The pattern depends on which one, so the generation is not pedantry, it is the specification.
  • Wheel shape. Round or flat-bottom. The pattern differs at six o'clock and the difference is visible in the finished cover.
  • Material. Alcantara, perforated leather, smooth Nappa or carbon grip. This determines grip, temperature and how the rim ages.
  • Thread colour. Tone-on-tone or an accent, chosen against the existing cabin rather than the paint.
  • Pattern and grip zoning. Whether the perforation covers the whole rim or only the areas hands hold, and which stitch pattern you want.
  • The date you need it. Only if there is one. It changes the answer from "yes" to "yes, if we start now" or "no", and it is better to hear that before paying.

A photograph of the current wheel and one of the interior from the driver's seat rounds it off. Two images save several emails.

The requests we see most often

"Something subtle, not obviously modified." This is the most common brief and usually means tone-on-tone thread, a matte material, and no contrast accent. Silver thread on black is the version that reads as factory performance trim rather than aftermarket.

"Match the stitching that is already in the car." Straightforward once we know the colour, and the reason we ask for a photo of the door card as well as the wheel.

"I want it to feel like a GT car." Alcantara with a restrained thread, perforated grip zones rather than a fully perforated rim.

"Can you do something heritage?" Warm thread on brown or tan leather, or a period-correct fabric. The heritage fabrics shop and period materials are where that starts, and the materials guide explains which finishes suit older cabins.

"It is a track car, comfort does not matter." Carbon grip, single accent colour, no perforation needed. The BMW E36 and E46 M3 kits are the stocked versions of that brief.

The mistakes that cost time

Quoting the model without the generation. It is the single most common gap, and it is the one that produces a wrong pattern rather than a slightly different look.

Judging colour from a screen. Thread and leather both shift between displays. We post physical samples for a reason, and the swatch page is free to UK addresses.

Describing a wheel by photograph only. A photo shows the finish but not the diameter, the rim thickness or whether it is flat-bottom. Those determine fit.

Forgetting the airbag on a Pro-Fit order. The airbag, horn button and electronics must be removed before the wheel is posted. If that is not something you want to do, choose a DIY cover instead: nothing needs to leave the car.

Leaving the deadline until after the design is agreed. Tell us the date in the first message and the conversation takes a different shape immediately.

Fitment questions, settled early

If your car is in the catalogue, the pattern is known and fitment is not a question. If it is not, the universal route covers standard wheels between 37 and 39cm measured across the outer edge of the rim. The compatibility guide covers the marques and models we see most, and the Porsche fitment finder narrows that down by model.

Anything outside those two paths is a bespoke pattern, which is possible but is a different conversation: it starts with dimensions and photographs, and it takes longer than ordering from stock.

Safety, stated plainly

Our covers are made to go over the existing rim, and the stitching pattern leaves the airbag area and its seam undisturbed. Do not add stitching, adhesive or any trim across an airbag seam, and do not fit a cover in a way that covers the horn or interferes with the airbag's deployment path. If a wheel has a damaged rim or a repaired structure, replace the wheel rather than covering it.

Vehicle names such as Porsche, BMW M3, Mercedes-AMG and Audi RS6 are used on this site only to describe what a cover is made to fit. We are not affiliated with, endorsed by or licensed by any vehicle manufacturer.

What happens after you send it

Send the brief through the quote form, or the contact page if you would rather write freely. We read it, come back with the questions that are genuinely missing, and quote. Nothing is charged at that stage.

If it helps to see options on screen first, the wheel configurator lets you change material and thread before sending, and the design assistant will suggest combinations from a description of the interior. Both are shortlist tools: the specification we build to is the one confirmed in writing.

And if the honest answer is that a stocked kit already covers your brief, we will say so. It is faster for you, and it leaves the bench free for the builds that genuinely need it.

An example of a brief that goes straight to a quote

"2019 Audi RS6 C7, round wheel, perforated leather with black thread throughout, no contrast accent, standard pattern across the rim rather than partial grips, needed by the second week of December." That is a complete brief: car, generation, wheel shape, material, thread, pattern and the date. It contains everything needed to answer, so the reply is a price and a production window rather than a list of questions.

Compare it with "can you do a cover for an Audi?", which needs four exchanges before it can be quoted. The difference is not the length of the message, it is whether the facts are in it. Six short lines beat a paragraph of description every time.

Frequently asked

+What do you need to quote a custom build?

The car's make, model, generation and year; whether the wheel is round or flat-bottom; the material you want; the thread colour; and any pattern or grip zoning. A photo of the existing interior helps more than a description. Everything else we can work out from that.

+Do you need the car present?

No, for a DIY cover kit. For the Pro-Fit service we need the wheel itself, posted to the workshop, with the airbag, horn button and electronics removed first. Seat builds are discussed individually.

+Can you copy a design from a photo?

Often, yes, if the photo shows the material and the seam clearly. What a photo cannot tell us is the wheel's actual dimensions, so a reference picture is a starting point rather than a specification.

Related reading

← All news and guides

Cookie & Privacy Notice

We use essential cookies to keep the site running and optional analytics cookies (Google Analytics) to understand how you use our site. We do not use advertising tracking cookies. Read our Privacy Policy